Blackmagic disk speed test does not stop by itself

#BLACKMAGIC DISK SPEED TEST DOES NOT STOP BY ITSELF HOW TO#

We are talking nearly double the speed in your transfer rate. The key here is that you have the proper speeds to transfer your data reliably. Both drives use 7200 RPM SATA III drives internally, but having that second internal drive in the G-RAID with the RAID 0 configuration makes a world of difference when it comes to having the necessary speed to transfer large data from a CF Card, C-Fast Card, RED Mag, Codex, etc. In the G-DRIVE, you are looking at a speed of 165MB/s. In a G-RAID, you are looking at a speed of 250MB/s. The big difference in these drives is the transfer rate speed. If you were to do this same setup with G-DRIVES instead, having two physical drives to be a вЂњMASTERвЂќ and a вЂњBACKUP,вЂќ you would be limiting yourself to an immense drop off in speed and performance, both onset for your backup time, as well as at the post-production house that will be backing this footage up to their asset storage system.

Most productions work in the mind frame of having two physical drives, a вЂњMASTERвЂќ and a вЂњBACKUPвЂќ drive. Unlike a RAID 5 configuration, this does not give you any sort of protection. The way RAID 0 striping works is that it pushes half of the data between the two drives that are inside the G-RAID. With this increased performance, you have to keep aware that just using one G-DRIVE does not protect your footage 100%. This allows for a larger performance from this drive, in the realm of 50% more speed than the G-DRIVE. Why specifically a вЂњ G-RAIDвЂќ and not the вЂњ G-DRIVEвЂќ model? It all comes down to speed and performance.ДЇor the G-RAID, you are working with two physical hard drives that are in a Raid 0 (striped), which lets the computer see the G-RAID as one drive. There are some obvious similarities to both packages, which is a general framework, but what is missing? There is a main component that could be added to both kits that could immensely help in protecting yourself for future projects. Color Monitor ( Flanders CM250, Sony OLED).RAID storage system ( Pegasus Raid, G-Speed Studio XL, etc.).For larger systems, you will most likely see:

Appropriate software: Double Data, Shotput Pro, DaVinci Resolve 11, etc.

Shane is covered he has his tools to make him successful for the project.ДЇor the most part, it is standard operating procedure for a DIT to roll onto a job with the following items: When he goes to Production or his agent to negotiate his deal, Shane never negotiates his meters into the deal. Shane owns a light meter and a color meter as a Director of Photography.

#BLACKMAGIC DISK SPEED TEST DOES NOT STOP BY ITSELF HOW TO#

It takes care of any worry and fear that something might go wrong.ДЄs much as this post is about learning to protect the footage, itвЂ™s also a lot about how to protect yourself. The point of that scenario is that having higher transfer speeds on the Master and Backup drives wouldВ be ideal for making sure that everything goes right at the end of the shoot day. Well, when that Backup drive went to editorial, an entire dayвЂ™s worth of material was corrupted. There is a problem with the Backup drive because the footage was not able to verify onto that G-Drive because Production did not give the DIT enough time to verify the backup and asked the DIT to turn in the Backup drive.

Well, suppose that Master drive was then lost on its way to editorial, and there is a problem with the Backup drive.

Now on the shoot day the DIT managed to back up the footage to the Master drive with no problem. What if on a job, the files were damaged and the DIT had to race back to the rental house to get the cards from the camera before they were wiped? Now when the DIT talked with production before the shoot and told them that two 4TB G-RAID drives were needed, production said that they were only willing to get two 4TB G-DRIVEs because they were less expensive. We need to get people to see what is important in their workflow as DITs on set and why these drives make a difference, especially when people are buying the G-Drives instead of the G-Raids, since the G-Drives are cheaper.вЂќ So Shane walks up to me and says: вЂњHey David, we need to talk about on-set workflow, specifically with the use of G-Raids.

Blackmagic disk speed test does not stop by itself